HTS705 Dry Ice Cleaning Blaster Machine is a cleaning machine applied in the field of automotive servicing, in which the dry ice particles are accelerated by the airflow at high speed to remove the carbon buildup. It can be used for the cleaning of carbon deposits in the engine compartment, cylinder combustion chamber, intake valve, throttle valve, and etc. HTS705 Dry Ice Cleaning Blaster Machine uses compressed air as power to spray dry ice particles to the surface of the cleaned object at supersonic speed. However, it does not rely solely on the kinetic energy of dry ice particles, but uses the ultra-low temperature performance of dry ice to achieve the purpose of decontamination. Dry ice spraying medium – dry ice particles accelerate in the high-pressure air flow and impact the surface to be cleaned. The unique feature of dry ice cleaning is that the dry ice particles are vaporized at the moment during cleaning, and the momentum of dry ice disappears at the moment of impact. The heat exchange between dry ice particles and the cleaning surface occurs rapidly, resulting in the rapid sublimation of solid CO2 into gas, and the volume expansion of dry ice particles is nearly 800 times within a few thousandths of a second, thus causing “micro explosion” at the impact point. Due to the volatilization of CO2, no secondary waste is generated during the dry ice cleaning process, and only the dirt that needs to be cleaned. High-Efficiency Cleaning HTS705 Dry Ice Blasting Machine adopts dry ice cleaning tech, which accelerates the dry ice particles through high-pressure airflow and impacts the deposits, thus removing the carbon buildup thoroughly. It can fully clean the carbon deposits in all vehicle parts without disassembling them as well. This effectively reduces the cleaning time and greatly improves efficiency. User-Friendly Design The universal wheel at the bottom of the dry ice blasting equipment supports 360° rotation for cleaning; multi-function control panel; large knob control, precise positioning of dry ice spray volume; body pendant for easy placement; stainless steel funnel, waterproof, rust and corrosion resistant, ergonomic Designed to view the amount of dry ice in real-time. Intelligent Control & 3m High-Pressure Tube HTS705 Dry Ice Blasters Machine adopts intelligent digital control, which can better adjust the ice output and effectively remove carbon on the surface area; it is equipped with a 3m high-pressure rubber hose, which is wear-resistant, anti-corrosion and anti-aging. The dry ice tank is made of high-quality stainless steel, which is rust and corrosion resistant. Large capacity: 5KG. Widely Used Dry Ice Blasting machine is ideally suited for wide applications in automobiles, electric power, rubber, plastic, chemical, printing, food, pharmaceutical, casting, ship, and aviation. Environmentally Friendly & Safe & No Residue Automotive Dry Ice Blasters Cleaning is a non-toxic substance without any reagents and chemicals. Use dry ice cleaning to replace toxic chemical cleaning, dry ice particles have no residual volatilization, no secondary waste residues and secondary pollution problems, and avoid long-term adhesion of undesirable substances to the equipment to affect the overall operation and cause damage to operators. Non-Destructive Cleaning & Improve Efficiency The dry ice cleaning machine can completely remove the attached dirt, and can also reduce the disassembly and damage to the equipment, avoid affecting the operation and use of the equipment during cleaning, and fundamentally protect the equipment and improve productivity. The dry ice blasting machine can clean different equipment and can be used in conditions where water washing and sandblasting are prohibited. Three Years Warranty For damage caused by non-human factors, we promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours. Important Hint 1. Before using the dry ice blasting machine, please read this manual carefully for proper operation. (Manuals can be downloaded in Product Guides and Documentation on the details page.) 2. It is strictly forbidden to touch the dry ice and ice blasting pipe. 3. It must be kept clean when adding dry ice, and no other foreign objects fall into the equipment. 4. This equipment uses solid CO2 particles, and ventilation must be ensured when operating dry ice cleaning. 5. Before carrying out the work, it is necessary to wear protective goggles, ear muffs, work clothes and gloves. 6. Before each work, set the ice supply speed to “0” and test if condensate is sprayed out of the nozzle. 7. Whenever the operation is not finished and you need to pause in the middle, please first set the ice speed to “0” and then turn on the blasting gun for 30-50s to ensure that the leftover ice is blasted out of the ice outlet tube to prevent ice blockage. 8. In order to ensure sufficient pressure and flow of compressed air from the air source, please choose the supply pipe of the air source larger than DN20 outside diameter and the pressure of the air source larger than 6 bar, so as to have a better cleaning effect. 9. In the middle of ongoing work, if you encounter equipment failure, please immediately disconnect the power. Operation Steps Step 1: Connect the air source andpower supply: Step 2: Connect the ice blasting gun; Step 3: Connect the ground wire; Step 4: Add in dry ice; Step 5: Turn on the power and adjustthe amount of dry ice; Step 6: Start cleaning; Q & A: 1.What are the requirements for the compressor?The air pressure requires 6BAR or more and the gas storage tank requires 300L；Air compressor power 7.5kw（When using, it needs to be directly connected to the air compressor, and the air source adapter cannot be used） 2.Does it produce it own ice? Where do I get the dry ice from?No,it doesn’t product the dry ice.You need to buy the dry ice from your local market. 3.What is the dry ice size?Dry Ice Particle State: 3mm Technical Parameter Power supply: AC110V/220V±10% 50Hz Dry ice capacity: 7.5KG Compressed air flow: 1~3.0m³/min State of dry ice particles: 3mm Air supply pressure: 0.3~1.0Mpa Dry ice blasting amount (adjustable): 0~3.2Kg/min Length of Air Tube: 3m Length of Ground Wire: 3m Size: 403×500×580mm Net weight: 49KG/Gross weight: 80KG Packing List 1pcs * HTS705 Dry Ice Cleaning Blaster Machine 1pcs * Intake hose (Connect to external air source) 1pcs * Ice outlet pipe (With signal line and switch) 1pcs * Rotatable ice spray handle 4pcs * Ice spray barrel 1pcs * Earplugs 1pcs * Safety goggles 1pairs * Gloves 1pcs * Ice shovel 2pcs * Fuses 2pcs * Ground clip wire 1pcs* User manual 1pcs * Ground wire connector